Printing With Bluetooth - Epson Stylus Photo RX600 User Manual

Printing With Bluetooth

When you print using Bluetooth, you need to select print settings in the Stylus
Photo RX600's Setup menu, then send a photo to the printer from your
Bluetooth-enabled device. Below is a basic description of how to print using the
Bluetooth Photo Print adapter and your Stylus Photo RX600. See the
documentation that came with your Bluetooth Photo Print adapter and your
Bluetooth-enabled device for additional printing instructions.
1. Turn on your Stylus Photo RX600 and press the
2. Use the d button to highlight
3. Choose the Paper Type, Paper Size, Layout, Resolution, and other print
settings (see page 85 for details).
4. Select the photo you want to print from your Bluetooth device and send it to
the printer. (Make sure you are within about 30 feet of the printer.) Printing
starts automatically using the settings you chose.
Note:
Available settings may vary among Bluetooth-enabled devices. For more
information, refer to your device's documentation.
If you are using Windows, you must use the software included with your
computer's Bluetooth adapter to set up a connection with your printer.
Your adapter may let you print using your Epson printer software. See the
documentation included with your computer's Bluetooth adapter.
If you are using Macintosh OS X 10.2 or later, you can use the Bluetooth Setup
Assistant to set up a connection with the printer and the Bluetooth File Exchange
utility to send a photo (see page 111 for file format requirements) to the printer.
See your Mac Help for more information on using these utilities.
118
Printing From Other Devices
Direct print image set
button.
Setup
and press
OK
.