Printing - Epson Stylus Photo RX600 User Manual

Printing

1. Press the
Film Print
mode.
2. Use the u and d buttons to choose
3. You see the film options on the right. Use the l and r buttons to choose your
film or slide type, then press the
4. After the film or slides are scanned, choose the picture(s) you want to print
with the l and r buttons, then choose the number of copies for each photo
with the u and d buttons.
5. Press the
OK
6. Press the u and d buttons to highlight
buttons to choose the type of paper that is loaded in the printer. (If you're not
sure about the paper type, see the table on page 87.)
Note:
It's important to select the correct Paper Type setting for the paper you're using, or
the print quality may not be what you expect.
7. Press the u and d buttons to highlight
buttons to select the size of paper you've loaded.
8. Use the u and d buttons to highlight
the l and r buttons to choose
9. To restore color from faded images, use the u and d buttons to highlight
, then use the l and r buttons to choose
Restoration
10. Use the u and d buttons to highlight
to select one of the following:
BorderFree
on the paper
With Border
11. When you're done adjusting print settings, press the x
button. Your print job begins printing.
B&W
x
Note:
To cancel a print job while printing, press the y Stop button.
button to set the Stylus Photo RX600 to Film Print
button.
: One photo per sheet, borderless; fits the photo lengthwise
: One photo per sheet, with borders around the edges
Custom Print
button.
OK
Paper Type
Paper Size
Resolution
or
Photo Best Photo
, then use the l and r buttons
Layout
Printing from Film or Slides
, then press the
OK
, then press the l and r
, then use the l and r
, then use
.
.
On
button or
Color
button.
95