Placing 35 Mm Slides On The Film Holder - Epson Stylus Photo RX600 User Manual

Hide thumbs Also See for Stylus Photo RX600:
Table of Contents

Advertisement

Placing 35 mm Slides on the Film Holder

1. Position the film holder so that the 35 mm slide section faces the center of the
scanner glass. The positioning posts fit in two small holes near the scanner lid,
as shown.
2. Places slides in the film holder as shown, with the duller (emulsion) side face
up.
3
Close the scanner lid.
4. Press the
5. Use the u and d buttons to choose
button.
OK
102
Printing and Scanning Without a Computer
button to set the RX600 to Film Print mode.
Film Print
Scan to Memory Card
, then press the

Advertisement

Table of Contents
loading

Table of Contents