Epson Stylus Photo RX600 User Manual page 140

Select a higher print quality and turn off mode; see
High Speed
"Customizing Windows Print Settings" on page 39 or "Customizing
Macintosh Print Settings" on page 49.
Make sure the printable side of the paper is face up.
The ink cartridges may need replacing; see page 123.
Try using Automatic mode (Macintosh); see page 43.
Align the print head; see page 128 for instructions.
Your printout is blurry or smeared.
Make sure your paper isn't damp, curled, or loaded face down (the printable
side should be face up). Load new paper face up.
Use a support sheet with special paper or try loading your paper one sheet at a
time.
Align the print head; see page 128 for instructions.
Use Epson papers for proper saturation and absorption of genuine Epson inks.
140
Solving Problems