Epson Stylus Photo RX600 User Manual page 78

3. Place your photo face down on the glass in the upper left corner about
0.1 inch from the edges, as shown.
Note:
If you place your photo or document against the edge of the glass, the edges of
your photo or document may not be scanned.
4 Close the scanner lid.
5. Press the
6. Use the u and d buttons to choose
button.
7. If you see a screen asking you to choose a program to launch for this action,
select
EPSON Smart Panel
Then click
The Epson Smart Panel window appears. Epson Scan automatically previews
and scans the image, which opens in the View Images and Set Options
window.
8. Select any settings you want to change, then click
The scanned image is transferred to your e-mail program and attached to a
new e-mail message.
Note:
If you see a window asking you to select the program to launch for this action,
select your e-mail program and click OK. See your Smart Panel help for more
information.
78
Scanning to a Computer
0.1 in
Move the photo in
about 0.1 inch from
the edges
button to set the Stylus Photo RX600 to Scan mode.
Scan
.
OK
0.1 in
Scan to Email
and click the
Always use this program
, then press the
OK
.
Next
box.