Scanning Film Or Slides With Epson Scan - Epson Stylus Photo RX600 User Manual

Scanning Film or Slides With Epson Scan

You can scan 35 mm color slides or film in any scanning mode; however, you must
use Home Mode or Professional Mode to scan black and white negative film.
These modes also provide greater control over scan settings.
Full Auto Mode
1. Make sure the white document mat has been removed from the scanner lid.
See page 71.
2. Start Epson Scan as described on page 63.
Your scanned image opens in your application window.
Home Mode or Professional Mode
1. Make sure the white document mat has been removed from the scanner lid.
See page 71.
2. Start Epson Scan as described on page 63.
3. Home Mode: For Document Type, choose
Negative Film
Professional Mode: For Document Type, choose
(for slides),
Film
Type.
4. Click the
Dust Removal
5. Select any other settings you want, then click
6. Adjust the scan area, as necessary; see page 66.
7. Click .
Scan
Note:
Never open the scanner lid while scanning, or your scans may not look right.
If you scanned from an application like Photoshop, your scanned image opens
in your application window.
Note:
Some applications don't support scanning multiple images at once and will only
open one scanned image.
8. Click to exit Epson Scan.
Close
, or
B&W Negative Film
Color Negative Film
box to reduce the appearance of dust on the film.
Positive Film
.
. Then select
Film
, or
B&W Negative Film
to preview your scan.
Preview
Scanning 35 mm Slides and Film
(for slides),
Color
Positive
for the Film
75