Lcd Problems; Uninstalling Your Software - Epson Stylus Photo RX600 User Manual

A dotted line appears in the image.
If this happens on both your screen and printout, clean the scanner glass with
a soft, dry, lint-free cloth (paper towels are not recommended). If the glass is
still not clean, use a small amount of glass cleaner on a soft cloth. Make sure
you wipe off any remaining cleaner. Don't spray glass cleaner directly on the
glass.
If the line is just on your printout, you may need to clean your print head, see
page 121.

LCD Problems

You can't read the menus or view photos on the LCD.
You may need to adjust the LCD contrast setting: Press the
set the RX600 to Setup mode. Press the d button to select
, then press the
Adjustment
the contrast, then press the
The LCD screen may be in sleep mode to protect the screen. If you see a
message floating on the screen, press any button on the RX600 to wake the
screen.

Uninstalling Your Software

You may need to uninstall and then reinstall your printer driver and utilities if, for
example, you upgrade your operating system. You don't need to uninstall
PhotoImpression or your on-screen Reference Guide. Follow the instructions in
these sections:
"Windows" on page 146
"Macintosh OS X" on page 147
"Macintosh OS 9" on page 148
button. Use the l and r buttons to adjust
OK
button.
OK
Setup
LCD Contrast
Uninstalling Your Software
button to
145