Epson Stylus Photo RX600 User Manual page 22

Note:
If you place your photo or document against the edge of the glass, the edges of
your photo or document may not be copied.
To copy a thick document, you can remove the scanner lid. Turn
off the Stylus Photo RX600, and open the scanner lid completely.
Then disconnect the cord from the TPU connector and pull the lid
straight up. Turn on the Stylus Photo RX600 and gently press
down the original to keep it flat on the scanner glass as you copy.
When you're finished, be sure to turn off the Stylus Photo RX600
before replacing the scanner lid and plugging in the connector.
5. Open the output tray.
6. Flip the feeder guard forward.
7. Press the sides of the left edge guide together and slide it all the way to the left.
8. Insert your paper against the right edge of the sheet feeder, behind the tab.
22
Copying
Feeder guard
Output tray