Printing Camera-Selected Dpof Photos; Restoring Default Settings - Epson Stylus Photo RX580 Basic Manual

11. Load enough sheets of the paper that you chose in the sheet feeder. (See
page 7 for paper loading instructions.)
12. Press the x
Note:
If you need to cancel printing, press the y Stop/Clear Settings button.
After you print your cards, you need to cut them. Then you can insert the cards
into envelopes and mail them.

Printing Camera-Selected DPOF Photos

If your camera supports DPOF (Digital Print Order Format), you can use it to
preselect photos and the number of copies to print while the memory card is still
in your camera. See your camera's manual for details.
1. Load paper as described on page 7.
2. Insert the memory card containing preselected
photos, as described on page 22. You see this screen:
3. Press
OK
4. Press the x
settings as necessary. See page 28 for instructions.
5. Press the x
Note:
If you need to cancel printing, press the y Stop/Clear Settings button.

Restoring Default Settings

Follow these steps to return all the RX580 settings to the factory defaults:
1. Press the
2. Press l or r to select
3. Press
OK
40
Printing From a Memory Card
button to print.
Start
to print your preselected photos.
Print Settings
button to print.
Start
button.
Setup
Restore Default Settings
again to restore settings to their factory defaults.
button and select
, then press
OK.