Epson Stylus Photo RX600 User Manual page 97

Note:
If the card is not properly formatted, you see a message on the LCD screen. Press
the button indicated on the LCD screen to format the card. Any data stored on the
card will be erased.
4. Open the scanner lid.
5. Place your photo face down on the glass in the upper left corner about 0.1
inch from the edges, as shown.
Move the photo in
about 0.1 inch
from the edges
Note:
If you place your photo or document against the edge of the glass, the edges of
your photo or document may not be copied.
6 Close the scanner lid.
7. Press the
Scan
8. Use the u and d buttons to choose
button.
OK
9. Use the u, d, l, and r buttons to select the following options:
Scan area: Auto cropping (
select
Max area)
Document type
Resolution
0.1 in
button.
: or
Text Graphics
: , , or
Normal Fine
0.1 in
Scan to Memory Card
if the edges of the photo are light in color,
Photo
Scanning a Photo to a Memory Card
, then press the
97