Table of Contents
Advertisement
Note: You can print only in color when printing directly from a memory card; you cannot
print in black and white.
When you want to remove the card, make sure the memory card access light is not
flashing, then pull the card straight out of its slot.
Caution: Do not remove the card or turn off the Epson Stylus CX7700 while the
memory card access light is flashing; you may lose data on the card.
Printing Selected Photos
Follow these steps to select the photos you want to print from your memory card:
1. Make sure your Epson Stylus CX7700 is not connected to your computer (or
your computer is turned off ).
2. Load several sheets of photo paper.
3. Insert the memory card if it is not already in the slot (see page 20).
4. Press the
Memory Card
Note: If your camera supports DPOF, you can use it to select the photos you want
to print and the number of copies; see page 24.
5. Press the l or r
6. Press the d or u
7. Press the paper type button to select
(whichever you loaded).
Paper
If you select
Plain Paper
Photo Paper
8. Press the paper size button to select
(127 × 179 mm).
5"x 7"
9. Press the x
Start
Note: To cancel printing, press the y Stop/Clear Settings button.
10. When you are done printing, remove the memory card by pulling it straight
out of its slot.
mode button to select
Photo/Options
button to set the number of copies.
Copies
, the photos print with a white border. If you select
, the photos print borderless, to the edge of the paper.
button to start printing.
Print Select
button to select a photo.
,
Plain Paper
Photo Paper
,
Letter
4"x 6"
Printing Selected Photos
.
, or
Matte
(101,2 × 152,4 mm), or
21
Advertisement
Table of Contents
