GE JGB928 Owner's Manual & Installation Instructions page 48

Installation Instructions
[] ASSEMBLE SURFACE BURNERS
(CONT.)
Place the burner heads on the bases matching the
letters, Place the correct size caps on the heads, Make
sure that the caps and heads are placed in the correct
location, There is one small, one mediun-l, one large
and one extra large head and cap,
Locatorpins
Pin slots
When placing, make sm'e tim h)cator pins in the
burner head are seated in the pin slots of the
burner base, Rotate the bm'ner head around the
burner base until it is level and securely seated,
[] CHECK IGNITION OF SURFACE
BURNERS
Operation of all cooktop and oven burners should be
checked after the range and gas sui)ply lines have been
careflfllv checked tor leaks.
Electric I_fition Models
Select a top burner knob and sire ultaneously i)usb
in and turn to LITE position. You will bear a clicking
sound indicating proper operation of the spark
module. Once the air has been purged ti'om the
sui)ply lines, burners should light within 4 seconds.
After burner lights, rotate knob out of the LITE
position. Try each burner in succession until all
burners have been checked.
Quality of Flames
The combustion quality of burner flames needs to be
determined visuallv.
(A) Yellow flames--
Call for service
(B) Yellow tips on
outer cones--
Normal for LP gas
(C) Soft blue
flames--Normal for
natural gas
If burner flames look like (A), call for service. Normal
burner flames should look like (B) or (C), depending
on the type of gas you use.
With I,P gas, some yellow tipping on outer cones
is normal.
48
[] CHECK IGNITION OF OVEN BURNER
The oven is designed to operate quietly and automatically.
To ot)erate the oven, press the BAI_" pad and then t)ress the
nmnber pads until 350 ° appears in the displa}. Touch the
START pad. Al[ter 30-90 seconds, the men burner will ignite
and burn until the set temperature is reached. The oven
burner will continue to c_cle on and off as necessarx to
maintain the oven at the temperature indicated by the display.
To check ignition of the broil burnex, touch the BROIL
HI/LO t)ad and then the START t)ad. After 30-90 seconds,
the broil burner will ignite.
Electric ignition models require electrical power to operate.
In case of a power outage, the oven burners on these models
cannot be lit manuall_ with a match. (;as will not flow unless
the glow bar is hot.
If the oven is in use when a power outage occurs, the burner
will shut off and cannot be re-lit until t)ower is restored.