GE JGB928 Owner's Manual & Installation Instructions page 33

Cleaningthe glass cooktop.(o.some models) ge.com
Clean your cooktop after
each spill. Use CERAMA
BRYTE® Ceramic Cooktop
Cleaner.
Normal Daily Use Cleaning
ONLY u_e CEIL_d_IA BRYTE Ceranfic
C{}okt{}p Cleaner on the glass cooktop.
Other creams max not be as eflectixe.
To maintain and protect tile sm_hce ot
yore _glass cooktop, tollow these steps:
, I
[] Befin'e using the cookto) for the
fi_t time, clean it with CE]_dVIA
BRYTE <':Ceramic Cooktop Cleane_:
This helps protect tile top and makes []
clean-up easier:
[] Daily rise of CEIL_d_L__BRYTE <_>
Ceramic Cooktop Cleaner will help
kee I) tile cooktop looking new.
[] Remove
tile burner
grates.
[] Shake tile cleaning cream well. Apply
a troy drops of CEILBd_IA BRYTE _>
Ceramic Cooktop Cleaner directly to
the cooktop.
[] Use a paper towel or CEIL_dVIA
BRYTE <_) Cleaning Pad fi)r Ceramic
Cooktops to clean tile entire cooktop
StlI'J[il ce.
Use a oh) cloth or paper towel
to remove all cleaning residue.
No need to iJnse. Be Stli'e no excess
residue is left on the electrodes or
burner
parts.
NOTE: It is very/?nportant thatyouDONOT heat
thecooktop until it hasbeencleaned thoroughly
Use a CERAMA BRYTE _ CleanhTg
Pad for Ceramic Co&tops or a
Scotch-Brite _3 Multi-Purpose No
Scratch blue scrub pad.
Burned-On Residue
WARNING: DAMAGEto yourglass surfacemay
occur if you use scrubpads other than those
recommendecL
] J_dh>wthe cooktop to cool.
[] Remoxe tile burner _m_tes_ Spread
a few drops of CEILBd_4A BRYTE ')
Ceramic Cooktop Cleaner to tile
entire burned residue area.
[]
Using tile included CEIL_dVIA BRYTE _)
Cleaning Pad fi>r Ceramic Cooktoi)s,
rub the residue area, applying
pressure as needed.
[] If am residue remains repeat tile
steps listed above as needed.
[] For additional protection, alter all
residue has been remoxed, polish tile
entire surti_ce with CEI{_dVIA BRYTE (':
Ceramic Cookto I) Cleaner and a
paper towel
The CERAMA BRFi-E *_Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Cente_
See itTstructimTs under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
] J_dlow tile cooktop to cool.
[] Remove tile burner grates.
V_ Use a single-edoe razor blade scra )er
• _-o r •
at all) )roxlillatelv, a 4:) angle, b_l( _llnst
the glass sudi_ce and scrape the soil.
It will be necessary to apply pressure
to tile razor scraper in order to
remove tile residue.
[] _Mter scraping with tile razor scrape_;
spread a few drops of CEILZ_dVIA
BRYTE (':Ceramic Cooktop Cleaner to
the entire burned residue area. Use
the CEI_Bd_IA BRYTE '_Cleaning Pad
to remove any remaining residue.
[] For additional protection, alter all
residue has been remoxed, polish the
entire surlhce with CEIL_d_IA BRYTE ')
Ceramic (_ooktop Cleaner and a
paper towel.
33