GE JGB928 Owner's Manual & Installation Instructions page 47

Installation Instructions
[] ELECTRICAL CONNECTIONS (CONT.)
B. Usage Situations where Appliance Power Cord will
be Disconnected Frequently.
Do not use an adapter plug in these situations because
disconnecting of tile power cord places undue strain on
tile adapter and leads to eventual failure of tile adapter
ground terminal, The customer should have the two-
prong wall receptacle replaced with a three-prong
(gro/mding) receptacle by a qualified electrician
befl)re using tile appliance.
Tile installation of appliances designed fin" mobile
home installation must conform with tile Manufactured
Home Const_ uction and Safety Standard, Title 24 CFR,
Part 3280 (formerly tile Federal Standard fin" Mobile
Home Construction and Satiety, Title 24, HUD, Part
280) o_; when such standard is not applicable, tile
Standard fin" Manufi_ctm'ed Home Installations, latest
edition (Manul,_ctured Home Sites, Commmfities and
Set-Ups), ANSI A225.1, latest edition, or with local
codes. In Canada, mobile home installation must be
in accordance with the current CAN/CSA ZE40/MH
Mobile Home Installation Code.
Electric Disconnect
• I,ocate disconnect I)lug, on tile raw,e_ back.
• Pinch sides of connector and pull out of range back.
[] SEAL THE OPENINGS
Seal an)
openings
in tile wall behind tile range and in tile
floor under tile range, when hookui)s, are completed.
[] ASSEMBLE SURFACE BURNERS
Assemble the burners as shown,
Grate
Burner cap
Burnerhead
Electrode
Burner b ase
CAUTION:
1,,, ,,,,t o perate tile
bm'ner without all bm'ner parts in place.
The top sides of the Right Front, Right Rear and Left
Front burner heads are marked with the letters "RF",
"RR" and "LF", respectively, to aid assembl).
Medium bead
(not marked) Smallhead
and cap andcap
t t
Largehead Extralarge
and cap headand
cap
47