GE JGB928 Owner's Manual & Installation Instructions page 29

ge.com
The oven door must be closed and all controls set correctly for the cycle to work properly.
,0
OD dD(D (D (D
(D(DOD(Zi
OD(DO(D(D
(D(D(D( Z)
How to Delay the Start of Cleaning
Make sure the clock shows the correct time
of day.
[] Touch the SELFCLEAN pad.
[] Using the nmnber pads, enter the
desired clean time.
[] Touch the DELAYSTART pad. The
earliest start time you can set will
appear in the display.
[] Using the number pads, enter the
time of day _ou want the clean cycle
1o staiI.
[] Touch
the START pad.
The door locks automatically. The display
will show the start time. It will not be
possible to open the oven door tmtil
the temperature drops below the lock
temperatm'e and the LOCKEDDOOR
light goes ofl_
_]_en the LOCKEDDOOR light is off, open
the doox:
After a Clean Cycle
You may notice some white ash in the oxen.
_]pe it up with a damp cloth alter the
o'_en cools.
If white spotsremain, r emove themwith a soap-
filiedscouring padandnnsethoroughly w ith a
whegar a ndwatermixture.
These deposits are usuall) a salt residue
that cannot be remoxed b_ the clean cxcle.
If the oxen is not clean after one clean
c',cle repeat the c_cle.
You cannot set the oven fi)r cooking tmtil
the oxen is cool enough for the door to
mflock.
_._lfile the oven is sel6cleaning, you can
touch the CLOCKpad to display the
time of day: To return to the clean
cotmtdown, touch the COOKING TIME
pad.
If the shelves become hard to slide, apply
a small amount _ffvegetable oil or cooking
oil to a paper u_wel and wipe the edges of
the oven shelves with the paper towel.
29