Job Accounting Menu - Dell B3465DN User Manual

Understanding the printer menus
Use
Brightness
‑6 to 6
Contrast
0–5

Job Accounting menu

Note: This menu item appears only when a formatted, working printer hard disk is installed. Make sure the printer
hard disk is not read/write‑ or write‑protected.
Use
Job Accounting Log
Off
On
Job Accounting Utilities
Accounting Log Frequency
Weekly
Monthly
Log Action at End of Frequency
None
E‑mail Current Log
E‑mail & Delete Current Log
Post Current Log
Post & Delete Current Log
Disk Near Full Level
Off
1–99
Disk Near Full Action
None
E‑mail Current Log
E‑mail & Delete Current Log
E‑mail & Delete Oldest Log
Post Current Log
Post & Delete Current Log
Post & Delete Oldest Log
Delete Current Log
Delete Oldest Log
Delete All Logs
Delete All But Current
To
Adjust the printed output either by lightening or darkening it. You can conserve toner
by lightening the output.
Note: 0 is the factory default setting.
Adjust the contrast of printed objects.
Note: 0 is the factory default setting.
To
Determine and set if the printer creates a log of the print jobs it receives.
Note: Off is the factory default setting.
Print and delete log files or export them to a flash drive.
Determine and set how often a log file is created.
Note: Monthly is the factory default setting.
Determine and set how the printer responds when the frequency threshold expires.
Note: None is the factory default setting.
Specify the maximum size of the log file before the printer executes the Disk Near
Full Action.
Note: 5 is the factory default setting.
Determine and set how the printer responds when the printer hard disk is nearly full.
Notes:
•
None is the factory default setting.
•
The value defined in Disk Near Full Level determines when this action is
triggered.
197