Prints On Color Transparencies Appear Dark When Projected; Shadow Images Appear On Prints - Dell B3465DN User Manual

Troubleshooting
Action
Step 4
a
Reinstall the imaging unit.
1
Remove the toner cartridge.
2
Remove the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
3
Install the imaging unit, and then the cartridge.
b
Resend the print job.
Is the page or image clipped?

Prints on color transparencies appear dark when projected

Note: This problem occurs when projecting transparencies with reflective overhead projectors. To obtain the highest
projected color quality, transmissive overhead projectors are recommended.
Action
Step 1
From the printer control panel, make sure the paper type setting is set to
Transparency.
Is the paper type setting correct?
Step 2
Reduce the toner darkness, and then resend the print job.
Does the print on the color transparency look lighter?
Step 3
Make sure you are using a recommended type of color transparency, and
then resend the print job.
Does the print on the color transparency look lighter?

Shadow images appear on prints

Leading edge
A B C D
A B C D
A B C D
A B C D
Trailing edge
Yes No
Contact technical The problem is solved.
support.
Yes No
Go to step 2. Set the paper type to
Transparency.
The problem is solved. Go to step 3.
The problem is solved. Contact
support.
280
technical