Dell B3465DN User Manual page 177

Understanding the printer menus
Use
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Fax Receive Settings
Use
Enable Fax Receive
On
Off
Fax Job Waiting
None
Toner
Toner and Supplies
Rings to Answer
1–25
Auto Reduction
On
Off
Paper Source
Auto
Tray [x]
Multi‑Purpose Feeder
Sides (Duplex)
Off
On
To
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible.
Note: 0 is the factory default setting.
Specify if the original document is scanned edge-to‑edge prior to faxing.
Note: Off is the factory default setting.
Adjust the sharpness of a fax.
Note: 3 is the factory default setting.
Specify "warm" or "cool" outputs. "Cool" values generate a bluer output than the
default while "warm" values generate a redder output than the default.
Note: 0 is the factory default setting.
To
Allow the printer to receive fax jobs.
Note: On is the factory default setting.
Remove fax jobs from the print queue when the job requires specific unavailable
resources.
Note: None is the factory default setting.
Specify the number of rings before answering an incoming fax job.
Note: 3 is the factory default setting.
Scale an incoming fax job so that it fits the size of the paper loaded in the designated
fax source.
Note: On is the factory default setting.
Specify the paper source for printing incoming fax jobs.
Note: Auto is the factory default setting.
Enable two‑sided (duplex) printing for incoming fax jobs.
Note: Off is the factory default setting.
177