Smtp Setup Menu - Dell B3465DN User Manual

Understanding the printer menus

SMTP Setup menu

Use
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout
5–30
Reply Address
Use SSL
Disabled
Negotiate
Required
SMTP Server Authentication
No authentication required
Login/Plain
CRAM‑MD5
Digest‑MD5
NTLM
Kerberos 5
Device‑Initiated E‑mail
None
Use Device SMTP Credentials
User‑Initiated E‑mail
None
Use Device SMTP Credentials
Use Session User ID and Password
Use Session E‑mail address and Password
Prompt user
Device Userid
Device password
Kerberos 5 Realm
NTLM Domain
To
Specify SMTP server gateway and port information.
Note: 25 is the default SMTP gateway port.
Specify the amount of time in seconds before the server stops trying to
send an e‑mail.
Note: 30 is the factory default setting.
Specify a reply address of up to 128 characters in the e-mail sent by the
printer.
Set the printer to use SSL for increased security when connecting to the
SMTP server.
Notes:
•
Disabled is the factory default setting.
• When the Negotiate setting is used, the SMTP server determines if
SSL will be used.
Specify the type of user authentication required for scan to e‑mail
privileges.
Note: "No authentication required" is the factory default setting.
Specify what credentials will be used when communicating to the SMTP
server.
Notes:
•
None is the factory default setting for Device‑Initiated E‑mail and
User‑Initiated E‑mail.
•
"Device Userid" and "Device password" are used to log in to the
SMTP server when Use Device SMTP Credentials is selected.
154