Maintenance Mode - Dell 948 User Manual

Understanding the Operator Panel Menus
Enable DHCP Enable DHCP on your printer.
NOTE:
Set IP Address Use the keypad to enter an IP address. Press the Select button
NOTE:
instead.
Set IP Netmask Use the keypad to enter an IP address. Press the Select button
NOTE:
instead.
Set IP Gateway Use the keypad to enter an IP address. Press the Select button
NOTE:
instead.
*Factory default setting/Current setting selected by user

Maintenance Mode

Main Menu Mode Main Menu
Maintenance Ink Levels
Clean Cartridges
Align Cartridges
Print Test Page
To view or change the Maintenance Mode menu settings:
1. From the main menu, use the left and right Arrow buttons
2. Press the Select button
3. Use the left and right Arrow buttons
Select button
From this You can:
menu:
Ink Levels Press the Select button
Press the Select button
Clean
Cartridges
when printing is complete.
Press the Select
Align
Cartridges
when printing is complete.
Press the Select
Print Test
Page
file:///T|/htdocs/systems/prn948/en/en/d0e648.html[10/10/2012 11:05:28 AM]
Yes*
No
You cannot change or set an IP Address, IP Netmask, and IP Gateway if DHCP is enabled.
The IP address cannot be changed if DHCP is enabled. View IP Address appears on the display
The IP netmask cannot be changed if DHCP is enabled. View IP Netmask appears on the display
The IP gateway cannot be changed if DHCP is enabled. View IP Gateway appears on the display
.
.
to view the level of ink in both cartridges.
to clean the ink cartridges. A cleaning page prints. You may discard the page
button to align the ink cartridges. An alignment page prints. You may discard the page
button to print a test page. You may discard the page when printing is complete.
to scroll to MAINTENANCE.
until the heading you want appears on the display, and then press the
to save your settings.
to save the settings.
to save the settings.