Printing Envelopes - Dell 948 User Manual

Printing
The Print dialog box opens.
4. Click Preferences, Properties, Options, or Setup (depending on the program or operating system).
The Printing Preferences dialog box opens.
5. On the Print Setup tab, select Photo, and then select the dpi settings for the photo from the drop-down menu.
NOTE: To print borderless photos, click the Borderless check box on the Print Setup tab, and then select the
borderless paper size from the drop-down menu on the Advanced tab. Borderless printing is only performed if
you are using photo/glossy paper. The printout on non-photo paper contains a 2 mm margin on all sides.
6. On the Print Setup and Advanced tabs, make any necessary changes for your document.
7. When you finish customizing your settings, click OK.
The Printing Preferences dialog box closes.
8. Click OK or Print.
9. Remove each photo after it exits the printer to prevent your photos from sticking together or smudging.
NOTE: Before placing your prints in a nonadhesive photo album or frame, allow sufficient time for the prints to dry
thoroughly (12 to 24 hours, depending on ambient conditions). This maximizes the life of your prints.

Printing Envelopes

1. Turn on your computer and printer, and make sure they are connected.
2. Load the envelope with the print side facing up.
3. With your document open, click File® Print.
The Print dialog box opens.
4. Click Preferences, Properties, Options, or Setup (depending on the program or operating system).
The Printing Preferences dialog box opens.
5. On the Print Setup tab, select Envelope, and then choose the size of the envelope from the Paper size: drop-down
menu.
NOTE: If you are mailing within Japan, the envelope can be printed in portrait orientation with the stamp in the
lower right corner or in landscape orientation with the stamp in the lower left corner. If you are mailing
internationally, print landscape orientation with the stamp in the upper left corner.
file:///T|/htdocs/systems/prn948/en/en/d0e4461.html[10/10/2012 11:05:37 AM]