Setting The Bluetooth Security Level - Dell 948 User Manual

User guide

Table of Contents

Printing

to the instructions included with the device for Bluetooth printing information.

You cleared the contents of the Bluetooth device list. For more information, see

The name of the Bluetooth device you are using is automatically deleted from the Bluetooth device list.

When the Bluetooth security level is set to High, the printer saves a list of up to 8 Bluetooth devices that have

previously set up a connection with the printer. If there are already 8 devices on the list, and then you need to set up

a connection for another Bluetooth device, the first device is automatically deleted from the list so that the new device

can be stored. You need to repeat the setup of the deleted device to be able to send a print job to the printer.

NOTE:

You need to set up a connection for each Bluetooth device that you will use to send a print job to the printer.

To set up a connection between the printer and a Bluetooth-enabled device:

1. Turn on the printer.

2. Insert a USB Bluetooth adapter into the USB port located on the front of the printer.

NOTE:

A Bluetooth adapter is not included with the printer.

3. Use the left and right Arrow buttons

4. Use the left and right Arrow buttons

5. Use the left and right Arrow buttons

The printer is now ready to accept a connection from a Bluetooth-enabled device.

6. Configure the Bluetooth-enabled device to set up a connection to the printer. Refer to the instructions included with

the device for Bluetooth connection information.

NOTE:

If the Bluetooth Security Level on the printer is set to High, you must enter a pass key. For more

information, see