Wireless Connection (Dell C1765Nfw Color Multifunction Printer Only) - Dell C1765NFW User Manual

To connect the printer to the network, connect one end of an Ethernet cable into the Ethernet port at the rear of the
printer, and the other end to a LAN drop or hub.
To setup a wireless connection, see "Wireless Connection (Dell C1765nfw Color Multifunction Printer Only)" on
page 37.

Wireless Connection (Dell C1765nfw Color Multifunction Printer Only)

The specifications of wireless setting function are described below:
Item
Connectivity
Connectivity Standard
Bandwidth
Data Transfer Rate
Security
®
Wi-Fi Protected Setup (WPS)
*1
WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed mode PSK, WPA-PSK AES, WPA2-PSK
AES, WPA-PSK TKIP, Open (No Security)
You can select a method to configure a wireless setting from the following:
WPS-PBC (Wi-Fi | WPS Button)
WPS-PBC (Operator Panel Menu)
*2
WPS-PIN
Auto SSID Setup
Manual SSID Setup
*1
WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required for wireless
configuration, by starting WPS-PBC on the printer with the
button provided on the wireless LAN access point (Registrar) or router. This setting is available only when the access point supports
WPS-PBC.
*2
WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices required for wire-
less configuration, by entering PIN assignments in the printer and computer. This setting, performed through access point, is available
only when the access points of your wireless router supports WPS.
Specification
Wireless
IEEE 802.11b/802.11g compliant
2.4 GHz
IEEE 802.11b mode: 11, 5.5, 2, 1 Mbps
IEEE 802.11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
64 (40-bit key)/ 128 (104-bit key) WEP , WPA-PSK (TKIP , AES), WPA2-PSK (AES)(IEEE
802.1x attestation function of WPA 1x non-corresponds), Mixed Mode PSK
*1
Push Button Configuration (PBC), Personal Identification Number (PIN)
*1
*1
(Wi-Fi | WPS) button or operator panel menu, and then pressing the
37
Connecting Your Printer