Transport Motor Cable Removal - Lexmark E330 Service Manual

4505

Transport motor cable removal

(See "Electronics" on page
3.Unplug the transport motor cable (XPRT) at J9.
4.Remove the LVPS/HVPS card assembly. See
card assembly removal" on page 4-10
5.Extract the cable through the side frame leaving it free at the
opening above the LVPS/HVPS.
6.Remove the fuser. See
information.
7.Extract the cable through the hole and from its retainers.
8.Unplug the cable at the motor and install the new cable.
4-14
Service Manual
7-4.)
1.Remove the right cover. See
removal" on page 4-3
2.Remove the controller card cover. See
"Controller card removal" on page 4-4
information.
"Fuser removal" on page 4-8
"Right side cover
for more information.
"LVPS / HVPS
for more information.
for more
for more