Usb Parameter Defaults - Datalogic QuickScan L QD 2300 Product Reference Manual

USB Interface
•
The following operating systems support the scanner through USB:
•
•
•
The scanner will also interface with other USB hosts which support USB Human Inter-
face Devices (HID). For more information on USB technology, hosts, and peripheral de-
vices, visit the website listed on the back cover of this manual.
To set up the scanner:
1. Attach the modular connector of the USB interface cable to the cable interface port on the
2. Plug the series A connector in the USB host or hub, or plug the Plus Power connector in
3. Select the USB device type by scanning the appropriate bar code from
4. On first installation when using Windows, the software prompts to select or install the
5. To modify any other parameter options, scan the appropriate bar codes in this chapter.
6. If problems occur with the system, see

USB Parameter Defaults

Table 16
scan the appropriate bar code(s) provided in the Parameter Descriptions section begin-
ning on
Appendix B, Standard Defaults
See
gies, and miscellaneous default parameters.
NOTE
76
Sun, IBM, and other network computers that support more than one keyboard.
Windows 98, 2000, ME, XP
MacOS 8.5 and above
IBM 4690 OS.
Interface cables vary depending on configuration. The connectors illustrated
Figure 12
in
illustrated, but the steps to connect the scanner remain the same.
NOTE
scanner (see Installing the Interface Cable on page
an available port of the IBM SurePOS terminal.
Type on page 77.
Human Interface Device driver. To install this driver, provided by Windows, click Next
through all the choices and click Finished on the last choice. The scanner powers up dur-
ing this installation.
lists the defaults for USB host parameters. If any option needs to be changed,
.
page 77
are examples only. The connectors may be different than those
Table 3.
for all user preferences, hosts, symbolo-
6).
USB Device
QuickScan
®
L