Rts Line State; Beep On <Bel - Datalogic QuickScan L QD 2300 Product Reference Manual

RS-232

RTS Line State

This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to
select Low RTS or
*
Host: Low RTS
Beep on <BEL>
When this parameter is enabled, the scanner issues a beep when a <BEL> character is de-
tected on the RS-232 serial line. <BEL> is issued to gain a user's attention to an illegal
entry or other important event.
Beep On <BEL> Character
(Enable)
46
line state.
High RTS
Host: High RTS
*
Do Not Beep On <BEL> Character
(Disable)
®
QuickScan L