Chapter 1. Introduction; About This Guide; Manual Overview - Datalogic QuickScan L QD 2300 Product Reference Manual

About this Guide

This manual presents advanced user information which includes connection, program-
ming, maintenance, technical specifications, and other useful references. For additional
user information, see the Quick Reference Guide (QRG). Copies of other publications
for this product are downloadable free of charge from the website listed on the back cover
of this manual.
On leaving the factory, units are generally programmed for the most common terminal
and communications settings. If you need to change these settings, custom program-
ming can be accomplished by scanning the bar codes in this guide.

Manual Overview

Chapter 1, Introduction
connection information.
Chapter 2, Getting Started
scanner.
Chapter 3, Operation
how to use the scanner in Trigger Single and Stand modes.
Chapter 4, Problem Isolation
problems.
Chapter 5, General Features
features for the scanner and general use bar codes to customize how the data is transmit-
ted to the host device.
Chapter 6, RS-232
ation.
Chapter 7, Keyboard Wedge Interface
Wedge operation.
Chapter 8, USB Interface
Chapter 9, Symbologies
ming bar codes necessary for configuring these features.
Appendix A, Technical Specifications
well as environmental and regulatory specifications. It also provides standard cable pin-
outs.
Appendix B, Standard Defaults
features and options.
Product Reference Guide
provides a product overview, unpacking instructions, and cable
presents information about unpacking and setting up the
describes parts of the scanner, beeper and LED definitions, and
outlines troubleshooting procedures addressing various
includes programming bar codes for selecting common
supplies information about setting up the scanner for RS-232 oper-
discusses how to set up the scanner for Keyboard
explains how to set up the scanner for USB operation.
defines options for all symbologies and provides the program-
lists physical and performance characteristics, as
references common factory default settings for scanner
Chapter 1
Introduction
1