Product Reference Guide - Datalogic QuickScan L QD 2300 Product Reference Manual

Problem
Host Error
Host displays scanned data incorrectly.
Trigger
Nothing happens when the trigger but-
ton is pressed.

Product Reference Guide

Possible Causes
Scanner is not programmed to work with
the host.
No power to the scanner.
Interface/power cables are loose.
Incorrect host interface cable is used.
If the problem persists after performing these checks, contact your
distributor or
NOTE
Ensure the proper host is selected.
Scan the appropriate host type program-
ming bar code.
For RS-232, set the scanner's communica-
tion parameters to match the host's settings.
For a USB HID keyboard or Keyboard
Wedge configuration, program the system
for the correct keyboard type and language,
and turn off the CAPS LOCK key.
Program the proper editing options (e.g.,
ADF, UPC-E to UPC-A Conversion).
Check the scanner's host type parameters
or editing options.
Verify that system power is sufficient. If the
scanner requires a power supply, reconnect
using an approved power supply.
Check for loose cable connections and re-
connect cables.
Verify that the correct host interface cable is
used. If not, connect the correct host inter-
face cable.
Technical Support
.
Problem Isolation
Possible Solutions
17