Nixdorf Beep/Led Options; Ignore Unknown Characters - Datalogic QuickScan L QD 2300 Product Reference Manual

RS-232

Nixdorf Beep/LED Options

When Nixdorf Mode B is selected, this indicates when the scanner should beep and turn
on its LED after a decode.
*Normal Operation
(Beep/LED immediately after decode)
Beep/LED After CTS Pulse

Ignore Unknown Characters

Unknown characters are characters the host does not recognize. When Send Bar Codes
with Unknown Characters is selected, all bar code data is sent except for unknown char-
acters, and no error beeps sound on the scanner. When Do Not Send Bar Codes With
Unknown Characters is selected, bar code data is sent up to the first unknown character
and then an error beep sounds on the scanner.
Do Not Send Bar Codes with Unknown Characters
48
Beep/LED After Transmission
*Send Bar Code with Unknown Characters
®
QuickScan L