Function Key Mapping
ASCII values under 32 are normally sent as control key sequences (see
). When this parameter is enabled, the keys in bold are sent in place of the standard
64
key mapping. Table entries that do not have a bold entry remain the same whether or
not this parameter is enabled.
*
Disable Function Key Mapping
FN1 Substitution
When enabled, the scanner replaces FN1 characters in an EAN128 bar code with a key-
stroke chosen by the user (see
Enable FN1 Substitution
Send Make and Break
When enabled, the scan codes for releasing a key are not sent.
*Send Make and Break Scan Codes
Product Reference Guide
Enable Function Key Mapping
FN1 Substitution Values on page 30
*Disable FN1 Substitution
Send Make Scan Code Only
Keyboard Wedge Host Parameters
Table 10 on page
).
63