Prefix/Suffix Values - Datalogic QuickScan L QD 2300 Product Reference Manual

Prefix/Suffix Values

A prefix and/or suffix can be appended to scan data for use in data editing as described
in the feature description,
To set a value for a prefix or suffix:
1. Change the scan data format using the instructions in the
2. Scan the appropriate prefix/suffix bar code below.
3. Scan a four-digit number (i.e., four bar codes from
4. To correct an error or change a selection, scan
Set Prefix
Product Reference Guide
Global Prefix/Suffix on page
Prefix/Suffix on page 28
sponds to that value.
When using host commands to set the prefix or suffix, set the key
category parameter to 1, then set the 3-digit decimal value corre-
sponding to the desired keystroke as listed in
(results in a four-digit ASCII code).
NOTE
.
Appendix E,
Data Format Cancel on page
Prefix/Suffix Values
28.
feature description, Global
Keypad) that corre-
Table 34 on page 167
29.
Set Suffix
27