Handlebar Assembly; Mounting Bracket & Water Bottle Assembly; Adapter Assembly - Smooth Fitness CE-3.0DS Owner's Manual

"A
I
SSEMBLY NSTRUCTIONS"
S –
TEP 7

Handlebar Assembly

a. There is an "R" decal on the RIGHT HANDLEBAR(10) and an "L" decal on the LEFT HANDLEBAR(9).
Slide the HANDLEBAR SLEEVE(48) onto the RIGHT HANDLEBAR(10).
b. Attach the RIGHT HANDLEBAR(10) into the RIGHT PIVOTING ARM(12) with 2 x SOCKET HEAD
BOLTS(M6x35mm)(90) and 2 x NYLON LOCK NUTS(M6)(102).NOTE: Assemble the SOCKET HEAD
BOLTS(M6x35mm)(90) by following the direction as shown by the drawing
c. Slide the HANDLEBAR SLEEVE(48) down to the cover the bolts on the RIGHT HANDLEBAR(10).
d. Repeat the above step on the left side.
S –
TEP 8 Mounting Bracket & Water Bottle Assembly
Attach the MOUNTING BRACKET(61) onto the UPRIGHT POST(4) with 2 x ROUND HEAD
BOLTS(M5x12mm)(86). Place the WATER BOTTLE(62) into the MOUNTING BRACKET(61).
S –
TEP 9

Adapter Assembly

Refer to the drawing on the left. Connect the ADAPTER(77) to the connector located on
the base of the MAIN FRAME(1). Plug the ADAPTER(77) into a 110V electrical outlet.
Finish the assembly, make sure that all parts are fully tightened before using the
equipment.
7