Smooth Fitness CE-3.0DS Owner's Manual page 20

"C
I
NSTRUCTIONS –
ONSOLE
"B. SET TIME or DISTANCE
To avoid confusion the user can only set time or distance in any one program.
TO ENTER TIME:
UP or DOWN
button:
P2~P7
c. After entering the
appear with the display flashing "0:00".
UP or DOWN
d. Use
Press enter to confirm (1:00 TO 99:00; 1 MINUTE
INCREMENTS)
NOTE for TIME:
 Count Up: If a target time was not selected, TIME
will count up from 0:00 to maximum 99:59 minutes
 Count Down: If you have set the target time, the
console will count down from that selected target
time down to 0:00
P
the TIME function mode will
buttons to set the desired TIME
ROGRAM (P2 ~ P7)"
TO ENTER DISTANCE:
ENTER
a. After entering the
appear with the display flashing "0:00".
b. Press the
function mode will then appear with the display flashing
"0.0"
UP or DOWN
c. Use
DISTANCE. Press enter to confirm(1 TO
999KM/MILE; 1 KM/MILE
INCREMENTS)
NOTE for DISTANCE:
 Count Up: If a target distance was not selected, this
would measure the total distance from 0:00 to 999
km/mile
 Count Down: If you have set the target distance, the
console will count down from the selected target
time down to 0
19
UP or DOWN
button and then
P2~P7
the TIME function mode will
ENTER
button again, the DISTANCE
buttons to set the desired
button: