Smart Technologies SMART Board 800ixe-SMP Configuration And User's Manual page 41

C H A P T E R 4
Using your interactive whiteboard system
Setting Use
Language menu
Language Selects language preference.
Information menu
Lamp Hours Displays the current number of lamp
usage hours from 0 to 4000 hours from
when it was last reset.
Input Displays the currently displayed video
input source (VGA-1, VGA-2,
Composite, S-Video, HDMI or
None).
Resolution Displays the projector's most recently
detected video source signal resolution
and refresh rate.
Firmware Version Displays the projector's digital display
processor (DDP) firmware version in
x.x.x.x format.
MPU Version Displays the projector microprocessor
unit (MPU) firmware version in x.x.x.x
format.
Network Version Displays the projector's network
communications processor firmware
version in x.x.x.x format.
Model Number Displays the projector's model number.
Serial Number Displays the projector's serial number.
31
Notes
Projector menu support is available in
English (default), Chinese (Simplified),
Chinese (Traditional), Czech, Danish,
Dutch, Finnish, French, German,
Greek, Italian, Japanese, Korean,
Norwegian, Polish, Portuguese
(Brazil), Portuguese (Portugal),
Russian, Spanish and Swedish.
Always reset the lamp hours after you
replace a lamp, because lamp service
reminders are based on the current
hours of use. See Resetting the lamp
hours on page 51 for details on the
lamp hours reset procedure.
If there is no current video input source
signal, this setting displays the last
known source signal image resolution
and refresh rate.
If you haven't enabled the Network
and VGA Out setting, this setting is
unable to display the projector's
network communications processor
firmware version and displays 0.0.0.0
instead.