Smart Technologies SMART Board 800ixe-SMP Configuration And User's Manual page 36

C H A P T E R 4
Using your interactive whiteboard system
Setting Use
Audio menu
Volume Adjusts the projector's volume
amplification from -20 to 20.
Mute Mutes the projector's audio output.
Disable Volume Disables the projector's volume control
Control and the LCD volume control on the
ACP.
Closed Captioning Turns closed captioning on or off for
video sources that support closed
captioning.
Closed Captioning Sets the closed captioning language to
Language CC1 or CC2.
Projector Functions menu
Auto Signal Detect Enables or disables signal searching of
input connectors.
Lamp Reminder Turns the lamp replacement reminder
on or off.
Lamp Mode Adjusts lamp brightness to Standard
or Economy.
Auto Power Off Sets the length of the auto power-off
(minutes) countdown timer between 1 and 240
minutes.
26
Notes
The default is 0.
The default is off.
If you mute the projector's audio output
and then increase or decrease the
volume, the volume is restored
automatically. You can prevent this
from happening by disabling the
volume control.
Typically, CC1 displays U.S. English
subtitles, while CC2 displays other
regional languages, such as French or
Spanish, depending on television
channel or media setup.
The default is off.
Select On to have the projector
continuously switch inputs until it finds
an active video source.
Select Off to maintain signal detection
in one input.
This reminder appears 100 hours
before the recommended lamp
replacement.
Standard displays a high-quality,
bright image.
Economy increases the lamp life by
decreasing the brightness of the image.
The default is 120 minutes.
The timer begins to count down when
the projector no longer receives a video
signal. The timer finishes when the
projector enters Standby mode.
Select 0 to turn off the timer.