Using The Remote Control Buttons - Smart Technologies SMART Board 800ixe-SMP Configuration And User's Manual

C H A P T E R 4
Using your interactive whiteboard system
g
To replace the remote control battery
1. Hold down the side release on the left side of the battery holder and pull the battery holder
completely out of the remote control.
2. Remove the old battery from the battery holder and replace it with a CR2025 coin-cell battery.
I M P O R T A N T
Align the positive (+) and negative (–) signs on the battery terminals with the correct signs on
the battery holder.
3. Insert the battery holder into the remote control.

Using the remote control buttons

The projector remote control enables you to access on-screen menus and change projector settings.
Press the Power
twice on the remote control to put the projector into Standby mode. You can also use the Input button
on the remote control or ACP to switch sources on the projector.
Number Function
1 Input
2 Menu
23
button on the ACP and select the Standby button or press the Power
Description
Select a video and audio input source.
Show or hide the projector menus.
button