Suspend To Disk (Std); Resume From Std Mode - EUROCOM 8500-C DeskNote User Manual

Suspend To Disk (STD)

Suspend to Disk is a 0-volt suspend mode for system power management.
STD mode saves the maximum power but takes the longest time to return
to full operation.
1.
Use your operation system's FDISK program to delete all partitions of
the hard disk if any already exist on the target drive.
2.
Boot the system and run the 0VMAKFIL.EXE Utility to create the
Suspend to Disk partition on the hard disk. The size of Suspend to
Disk partition will be the installed DRAM (n) plus 8MB integrated video
RAM.
For example, if the system DRAM is 32MB, 0VMAKFIL will create a
partition size of approximately 40MB.

Resume from STD Mode

The system will resume from Suspend-To-Disk mode by:
Power back on
Alarm resume (month/day/hour/minute)
Opening the display lid (only if the suspend mode is initiated by
closing the display lid)
:\>0VMAKFIL –Pn
:\>0VMAKFIL –P32