Installing Windows 95 - EUROCOM 8500-C DeskNote User Manual

Chapter 5: Installing Drivers

! ! ! ! Installing Windows 95

Preparation for installing Windows 95:
1. Use a bootable floppy disk to start the system.
2. Run FDISK utility from DOS to create a bootable partition.
(See DOS manual for the operation detail.)
3. Format hard disk.
bootable hard disk and make the boot system file.
(C;/S copies system files to the formatted disk)
4. Run CDINST.COM program from the "CD-ROM Drive Installation
Diskette" that will help you to install CD-ROM driver device
automatically. See the driver manual for detail.
5. Restart the system.
1. Start DOS.
2. Insert the Windows 95 CD-ROM.
3. Go to the "setup" directory, type "setup", then press [Enter].
4. After the Windows 95 setup program performs a routine check on your
system, press [enter] to continue.
5. When the "Welcome to Windows 95 Setup" screen appears, click
"Continue".
6. Click "Yes" on the "License Agreement" screen.
7. Click "Next" to select "Collecting Information About your PC".
8. Click "Next" to select the default of "C:\Windows", or enter a different
directory.
9. On the screen of "Setup Options", select "Typical", then click "Next".
10. On the screen of "Certificate of Authenticity", enter the Product
Identification Number, then click "Next".
11. On the screen of "User Information", enter your name and company,
then click "Next".
12. Select "Install The Most Common Components (recommended)", then
click "Next".
13. On the screen of "Startup Disk", insert a blank diskette into the A drive
to create a startup diskette.
14. The Setup Wizard is now copying files. After the copying is finished,
Follow the command "Format C:/S" to create a
5-11