Removing The Asf Assembly - Epson Stylus COLOR 1160 Service Manual

EPSON Stylus COLOR 860/1160

4.2.4.6 Removing the ASF Assembly

1. Remove the Upper Housing. (Refer to Section 4.2.1.)
2) Remove the following Cables from the cable hook in right side (viewed
from back) of the ASF Assembly.
- ASF HP Sensor Cable
- PF Motor Cable
3) Remove two screws (No.7 and ASF fixing screw) securing the ASF unit to
the Bottom Frame. Refer to Figure 4-29.
ASF Assembly
(Right Side)
ASF Fixing Screw
Figure 4-29. Removing the ASF Assembly (1)
Disassembly and Assembly
ASF Assembly
(Left Side)
No. 7 Screw
Disassembly Procedures
4) Slide the ASF unit to the right (viewed from back) and pull it backward
carefully while holding up the Sub Paper Support Upper. Refer to Figure
4-30.
Sub Paper Support Upper
Figure 4-30. Removing the ASF Assembly (2)
Revision C
97