Lubrication - Epson Stylus COLOR 1160 Service Manual

EPSON Stylus COLOR 860/1160

6.1.3 Lubrication

The type and amount of oil and grease used to lubricate the printer parts are
determined based on the results of internal evaluations. Therefore, be sure to
apply the specified type and amount of oil and grease to the specified part of
the printer mechanism during servicing.
n
Never use oil and grease other than those specified in this
manual. Use of different types of lubricant can damage the
printer and its components.
n
Never apply larger amount of lubricant than specified in
this manual.
Table 6-1. Specified Lubricants
Type Name
Grease G-26
Oil O-12
Maintenance
EPSON Code Supplier
B702600001 EPSON
1038991 EPSON
Table 6-2. Lubrication Point
No. Standard
<Lubrication Point>
Inside of "BUSHING, 12, RIGHT"
<Lubricant Type> G-26
1
<Lubrication Amount>
Take a 3mm-diameter ball and apply it
evenly to the inside of the bushing.
<Lubrication Point.>
"HOLDER, PULLEY, DRIVEN"
<Lubricant Type> G-26
2
<Lubrication Amount>
1 x 3mm (4 places)
<Lubrication Point>
Inside of "BUSHING, 12, LEFT"
<Lubricant Type> G-26
3
<Lubrication Amount>
Take a 3mm-diameter ball and apply it
evenly to the inside of the bushing.
<Lubrication Point>
Inside of "BUSHING, 6" (2 bushings)
<Lubricant Type> G-26
4
<Lubrication Amount>
Take a 1mm-diameter ball and appy it
evenly to the inside of the bushing.
<Lubrication Point>
Flat surface of "PULLEY, DRIVEN"
5 <Lubricant Type> G-26
<Lubrication Amount>
1 x 1mm (2 places)
Overview
Revision C
Remarks
See p. 151.
See p. 151
Use a brush to apply grease.
See p. 151
Use a brush to apply grease.
See p. 151.
See p. 152.
152