Epson Stylus COLOR 1160 Service Manual page 135

EPSON Stylus COLOR 860/1160
However, this directional difference among Bi-D patterns should not be
considered, and you can always confirm and adjust the pattern correctly
by referring to gap amount only.
3. Click the "Previous" and go back to the BI-Directional Adjustment"
menu. And choose the "Adjust" menu and click the "OK" button.
Figure 5-25. Choose the Adjust menu
4. Check the printed pattern and find the misaligned dot type.
Adjustment
5. Choose the misaligned dot size in the following menu and click the
"OK" button.
Figure 5-26. Choose the misalined dot size
6. By choosing the misalined dot size, following input menu for the
adjustment value is displayed.
Figure 5-27. Bi-d adjustment input menu
Adjustment
Revision C
135