Removing The Paper Feed Roller Assembly - Epson Stylus COLOR 1160 Service Manual

EPSON Stylus COLOR 860/1160

4.2.4.6.1 Removing the Paper Feed Roller Assembly

1. Remove the ASF assembly. (Refer to Section 4.2.4.6.)
2) Remove the Gear 32 from the right edge of the LD Shaft by releasing the
hook in the Gear 32. Refer to Figure 4-33.
3) Remove the Right Hopper Release Lever from the right edge of the LD
Roller Shaft. Refer to Figure 4-33.
Gear 32
Figure 4-33. Removing the Gear 32 & LD Roller
Disassembly and Assembly
Right Hopper
Release Lever
Hook portion
Disassembly Procedures
4) Move the left Paper Feed Roller Assembly to the center. Then:
Stylus COLOR 860: Remove the Left LD Roller Fixing Bushing (white
plastic) attached to the left end of the LD Roller Shaft. Refer to Figure 4-34.
Stylus COLOR 1160: Remove the E-Ring attached to the left end of the
LD Roller Shaft. Refer to Figure 4-34.
5) Slide the LD roller shaft to the left side and remove the ASF HP Detection
Wheel after releasing its hook. Refer to Figure 4-34.
SC860
Left LD Roller Fixing
Bushing
ASF HP Detector
Wheel
Hook on the ASF HP
Detector Wheel
Figure 4-34.
Removing the LD Roller Fixing Bushing & ASF HP Detector Wheel
Revision C
SC1160
E-Ring
LD Roller Shaft
99