Remedies For The Paper Jam Error - Epson Stylus COLOR 1160 Service Manual

Color ink jet printer
Hide thumbs Also See for Stylus COLOR 1160:
Table of Contents

Advertisement

EPSON Stylus COLOR 860/1160

3.1.1.2 Remedies for the Paper Jam Error

This section includes the check points and corresponding actions which
are necessary when the Paper Jam Error constantly occurs when the
printer is turned on or feeding paper.
The printer detects the Paper Jam Error in the following Conditions.
n When the printer is turned on, the PE sensor detects the paper
and attempt to eject it by rotating the PF roller. But, the Low
signal (paper detect status) is not removed.
Be sure to follow the steps in the order described in the tables.
NOTE: If the finding for the question is Yes, take the action described in
the right column. If "No", proceed to the next step.
Troubleshooting
Table 3-6. Remedies for Paper Jam Error
Step
Detail Phenomenon
1
When the Paper is
ejected, the PF roller
advance the paper.
But, the Paper is not
ejected completely.
And, Paper Jam is
indicated.
2
When the printer is
turned on, the PF roller
rotates continuously
about 10 sec. After that,
Panel LED indicates the
Paper Jam.
• Ditto
3
• Ditto
4
• When the Paper is
5
loaded from the ASF,
the Top of the Paper
is loaded to the PF
roller. But it dose not
reach to the Paper
Guide Front. And
Panel LED indicates
the Paper Jam.
If Paper Feed Operation
is repeated, Fatal Error
is indicate.
Overview
Revision C
Check & Actions
Make sure if the paper length is beyond the
specifications is used.
Make sure that any paper dust or material push
up the tip of the PE sensor Actuator.
Viewing the PE sensor from the front, check that
the actuator is the correct position: the actuator
falls in the cutout without any paper.
Referring to Step 3 in Section 3.1.1.1 "Remedies
for Paper Out Error", check the sensor condition.
Referring to Step 4 in Section 3.1.1.1 "Remedies
for Paper Out Error", Check the sensor function.
Make sure if the ASF Hopper Release Lever is
assembled properly to the LD roller shaft in the
ASF.unit. Refer the following figure.
Left ASF Hopper
Right ASF Hopper
59

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus color 860

Table of Contents