(CD-ROM and paper) EPSON Photo Stickers (refill, paper only) EPSON Iron-On Cool Peel Transfer Paper EPSON Photo Quality Self Adhesive Sheets Matte Paper - Heavyweight EPSON Ink Jet Back Light Film A3 Printer Specifications Printing Printing method Nozzle configuration Black Color Resolution...
Page 2
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
The minimum top margin is 0.12 inch (3.0 mm). When loading multiple sheets of EPSON Photo Quality Glossy Film, the minimum top margin is 1.2 inches (30 mm). B-L: The minimum left margin is 0.12 inch (3.0 mm).
Rated current 0.4 A Power consumption Approx. 14 W (ISO/IEC 10561 Letter Pattern) Approx. 3.5 W in standby mode * Check the label on the back of the printer for your printer’s voltage. Environmental Temperature Operation 50 to 95 °F (10 to 35 °C) Storage* 4 to 104 °F ( 20 to 40 °C)
1. Lower the output tray and open the printer cover. 2. Press the P power button to turn on the printer. The P power light flashes and the B black and A color ink out lights come on. The ink cartridge holders move left into loading position.
Photo Quality Glossy Film Ink Jet Transparencies Matte Paper - Heavyweight Use these EPSON ink cartridges within six months of Ink Jet Back Light Film installing them and before the expiration date on the package: Black ink cartridge: S020189...
EPSON’s warranty. When you need new ink cartridges, contact your dealer or call EPSON Accessories at (800) 873-7766 or visit our web site at www.epsonsupplies.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral.
Follow these steps to replace an ink cartridge before the B black or A color ink out light is flashing or on: 1. Make sure the printer is turned on and not printing (the Ppower light should be on, but not flashing), then open the printer cover.
10 When you don’t turn on your printer for a long time, the print quality can decline. It’s a good idea to turn on your printer at least once a month to maintain good print quality.
Load paper that’s at least 8.27 inches (210 mm) wide to prevent ink from spraying inside the printer and smudging your printouts. For the best results, load EPSON ink jet paper in the printer whenever you check the print head alignment.
, then Follow these steps: Settings 1. Turn on the printer, wait until the print head locks in the Properties far right position, then turn off the printer. 2. Unplug the power cord from the electrical outlet. Then disconnect the printer cable from the printer.