Loading The Program - Duerkopp Adler 511 Installation Instructions Manual
Cnc automat for bartacking seams and short seams
Hide thumbs
Also See for 511:
- Service instructions manual (44 pages) ,
- Fitting instructions manual (12 pages) ,
- Operating instructions manual (102 pages)
Table of Contents
Advertisement
10.2.2
Loading the program
24
–
Turn off the main switch.
–
Insert the dongle in the X111 socket on the control unit (see
illustration)
–
Turn on main switch. The software will be loaded. The loading
process takes less than 60 seconds.
CAUTION !
Do not remove the dongle during the loading process and do not
switch off the machine! (This will damage the software.)
–
The machine proceeds with a warm start after the software is
loaded.
–
The following screen appears:
Advertisement
Table of Contents
