Loading The Program - Duerkopp Adler 510 Operating Instructions Manual
Cnc automat for bartacking seams and short seams
Hide thumbs
Also See for 510:
- Operating instructions manual (103 pages) ,
- Parts list (58 pages) ,
- Operating/service instructions manual (46 pages)
Table of Contents
Advertisement
10.2.3
Loading the program
–
Turn the machine off at the main switch.
–
Insert the dongle 2 into the socket X110 (Dongle) 1 of the control
unit (see pictures).
–
Switch on the main switch. The Software will be loaded. The
loading process takes less than 60 seconds.
Important !
During the loading process do not remove the dongle and do not
switch off the machine (you will damage the software)!
–
The machine proceeds with a warm start after the software is
loaded.
–
The following screen appears.
INFORMATION
2
25
Advertisement
Table of Contents
