Software Installation; General - Duerkopp Adler 511 Installation Instructions Manual

10.2 Software installation

10.2.1

General

Loading specific sewing software in the DACIII control unit is possible
with the help of the "Programmed Dongle". The "Programmed Dongle"
has a label indicating the class and software version.
Such a load (boot) process can be used to provide individual DACIII
control unit with sewing
software (first installation) or to install updated machine software.
When the machine is delivered, only the test software (allowing the
loading of sewing software) is installed in the control unit. The test
software offers no further functions. If the test software gets damaged
during the loading process, it is no longer possible to load software
using a dongle. In such a case, you should use a PC with an upload
cable.
CAUTION !
Turn off the main switch before connecting the dongle!
2
23