Change Sewing Feet And Fabric Support Plate - Duerkopp Adler 511 Installation Instructions Manual

6.

Change sewing feet and fabric support plate

16
2 1
The automatic bartacker 511 is delivered with standard sewing
equipment.
If you have received further optional sewing equipment, this has to be
mounted as follows:
Caution – Risk of Injury !
Turn the main switch off.
Change sewing equipment only when main switch is switched off.
Disassemble sewing equipment
–
Unscrew screw 3.
–
Pull off holder 5.
–
Take out sewing feet 4 and 6.
–
Unscrew screw 1.
–
Take off support plate 2.
Assemble sewing equipment
–
Insert sewing feet 4 and 6.
–
Place retainer plate 5 and screw tight with screws 3.
–
Place support plate 2 and screw tight with screw 1.
ATTENTION: Danger of breakage !
When changing the clamping foot, be sure to enter the new clamping
foot number in the menu "Equipment".
3 6 5 4 3