Oil The Wicks And The Felt Part In The Oil Pan - Duerkopp Adler 511 Installation Instructions Manual
Cnc automat for bartacking seams and short seams
Hide thumbs
Also See for 511:
- Service instructions manual (44 pages) ,
- Fitting instructions manual (12 pages) ,
- Operating instructions manual (102 pages)
Table of Contents
Advertisement
9.2
Oil wicks and felt part in the oil pan
1
CAUTION !
When assembling the machine and after a longer stop, the wicks and
the felt parts 1 and 2 have to be soaked with some oil.
–
Tilt automatic bartacker sideways.
–
Put a drop of oil on felt 1.
–
Tilt back automatic bartacker.
–
–
Screw off cover of winder.
–
Put a drop of oil on felt 2.
–
Place on cover of winder and screw tight.
2
2
21
Advertisement
Table of Contents
