Set Up The Automatic Bartacker - Duerkopp Adler 511 Installation Instructions Manual

4.2

Set up the automatic bartacker

4 3 2 1
The small parts for setting up the automatic bartacker are included in
the accessories kit.
–
Place the automatic bartacker 1 on the oil pan 4.
–
Fasten the bartacker on the left and right sides using the fixtures 5
and 8.
Screw the fixtures 5 and 8 tight with the screws 9, the sheets 11
and the counter-nuts 10.
–
Insert the machine head support 6 in the drill-hole of the table top.
–
Tilt the automatic bartacker sideways.
–
Run the connecting cables 2 under the table top through the
opening 3.
–
Tilt the automatic bartacker back.
9
8
10
8 7
9
10
11
6 5
5
11
2